Renaming pfSense Interfaces

Only recommended for a fresh setup. I do not take any responsibility if you brick your config. Always make sure you have a recent backup of your config before tinkering with the config-file! If you are using for example pfELK for analysing your logs from your pfSense firewall, you may want to rename your interfaces... » weiterlesen

Check_MK – pfSense State Table Check (SNMP)

I needed a quick and dirty check for the pfSense’s "State Table" via SNMP as I sometimes have the strange problem that it gets full and then I lose internet-connection. If the thresholds are hit and I am alerted, I hope I have time to investigate what is going wrong. The Check The default values... » weiterlesen

My VM New Homelab

This HowTo is mainly meant as documentation if I have to resetup my lab 🙂 Hardware Ryzen 7 4750G 64GB RAM Network Interface card with 4 ports 1TB NVME M2 disk Prerequisites Internet Connection (in this case via my pfSense VM running on old lab) Backup of pfSense config Setup After doing a minimal Fedora... » weiterlesen